Magnetic stripe reader products

Home Up Contact Us Contents Search

MSR210

 

 Home
Up

 

MSR210 Magnetic stripe reader

  • Programmable track data output and on screen configuration set up
  • Downloadable firmware
  • Multi-language capability
  • Read magnetic stripe cards conforms to ISO 7811 and  AAMVA
  • Read high and low coercivity magnetic stripes (300 - 4000 Oe)
  • LED and beeper for read status

Click on the picture to enlarge

Magnetic Stripe Reader pricing click here

FEATURES

1

 LED and Buzzer indicators indicate the status of reader.

2

 Single, dual, or triple track versions allow to reading ISO, AAMVA and DMV cards.

3

 User-friendly setting directly by keyboard.

4

 PC could be powered on with MSR210D attached and without keyboard connected.

5

 Programmable data output.

6

 Compact size that can be mounted on keyboard or any flat surface.

7

 Firmware download (Note: It can't be executed via Notebook PC.)

CONFIGURATION
  • MSR210D-12 Dual track 1&2
  • MSR210D-23 Dual track 2&3
  • MSR210D-33 Triple track 1&2&3
  • Note: Optional configuration is available.

AGENCY APPROVED

-- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.

-- Comply with CE mark Class A, UL, and cUL

    -- This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARRANTY

This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warranty period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal use of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’ misuse or modification of the product.

WARNING

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

SET-UP
  1. Turn the system power off.
  2. Connect one connector of Y cable to the keyboard cable.
  3. Connect another one of Y cable to the keyboard port of your system.
  4. Turn the system power on.

SPECIFICATIONS

Recording Method Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.
Swipe Speed 5 to 55 in/sec (worst case with ±12% jitter card)
Power Requirements Reader is low-power CMOS. The computer supplies power.
Communication Keyboard simulator interface
Operating Temp - 10° C to + 50° C Storage Temp: -30° C to +70° C
Humidity Operating: 10-85% (non condensing); Storage: 10-90% (non condensing)
Magnetic Head Life 500K swipes Min. (1M swipes optional)
Dimensions 100L x 34W x 27H mm (3.94L x 1.34W x 1.10H inch)
Weight 170g (6.0oz)
Click on the picture (right) to see dimensions

OUTPUT DATA FORMAT

SINGLE TRACK: <SS><TRACK1 or 2 or 3 DATA><ES><CARRIAGE RETURN>

DUAL TRACKS: <SS><TRACK1 or 2 DATA><ES><CARRIAGE RETURN>

<SS><TRACK2 or 3 DATA><ES><CARRIAGE RETURN>

TRIPLE TRACKS: <SS><TRACK1 DATA><ES><CARRIAGE RETURN><SS><TRACK2 DATA><ES><CARRIAGE RETURN><SS><TRACK3 DATA><ES><CARRIAGE RETURN>

SS = START SENTINEL TRACK1 "%" (ISO, DMV & AAMVA)

TRACK2 ";" (ISO, DMV & AAMVA)

TRACK3 ";" (ISO) "%" (AAMVA) "!" (DMV)

ES = END SENTINEL TRACK1 & 2 & 3 "?" (ISO, DMV & AAMVA)

Data characters in italics are optional!

 

[ Home ] [ Up ]

Send mail to Sales: sales@tyner.com with questions about products listed on this site or products. Please be specific as to which of our 30,000 products your email is about.
We will be closed February 22 - 24
If you need an answer quickly please call: 775-537-1197 or US and Canada 800-640-9792. Hours 7am - 2:30pm PST Monday - Friday
Last modified: 01/31/10